Home // Motorcycles // Yamaha
ProEFX 12V Hot Start Installation: (Yamaha WR motorcycle shown.
Source: www.hotstartsystem.com
File Size: 216.62 KB
Category: Motorcycles
Last Download : 26 days 22 hours 20 minutes ago
Short Description: ProEFX 12V Hot Start Installation: (Yamaha WR motorcycle shown. Please follow these instructions in a general sense for other brands.) ...
Content Inside: ProEFX 12V Hot Start Installation: (Yamaha WR motorcycle shown. Please follow these instructions in a general sense for other brands.) Thank you for purchasing the ProEFX hot start system from MX Systems LLC. Please carefully follow the tips from the installation instructions. If you have any questions during installation, please don't hesitate to call or email for support. 1. Remove seat, tank and shrouds. Solenoid valve assembly: Remove existing hot start lever, cable and valve from the carburetor. 2. Tip: Clean all dirt from hot start bore and mating surfaces on the carburetor body with gas and a q-tip. 3. Tip: Use a small amount of Teflon tape (one wrap) on the threads of the aluminum mounting nut to ensure a water tight seal. 4. Install the Pro EFX hot start valve in the hot start bore (as shown in picture), with return spring, impact 5. Mount activation switch on preferred washer and delrin plunger in place. handle bar location. Pictured on · Tip: Installation of the clutch side, in place of the stock kill solenoid valve may require switch. temporary rotation of the carburetor away from the top engine mount bracket. · Install with the solenoid valve assembly disconnected from wiring harness. · Screw in by hand and finish tightening with needle nose pliers. Do not over-tighten.
Related PDF Files
Related Search:
